SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:

MFG.: Highlight Industries	
YEAR: 2009
Model:  MCJ-14013
S/N:

Synergy 5 High Speed Roper Automatic Turntable Stretch Wrapper

General System Information:

Dual Power Hydro-Stretch, a feature exclusive to Highlight Industries,
 Inc.
provides two independent levels of pre-stretch:  one for the bottom of
 the
product, the other for the rest of the product.  Over 70% of film 
breaks
occur at the bottom of the product where the product and pallet meet. 
 Dual
Power Hydro-Stretch allows you to set the pre-stretch level at the 
bottom of
the product independent of the pre-stretch level on the rest of the 
product.
This allows products to be wrapped tighter at higher stretch levels 
and at
lower costs.

Unlimited Film Stretch:

Dual Power Hydro-Stretch has the ability to stretch any gauge or any
quality of film to its ultimate stretch level.  The stretch level of 
the
Dual Power Hydro-Stretch is unlimited because it is not controlled by
gears or pulleys.  The flexibility of Dual Power Hydro-Stretch insures
that whatever films are available today or tomorrow can be used to 
their
maximum efficiency.

Film Force Control:

The film force applied to the product is also fully adjustable.  Any 
force
level, from a very light force to a very high force, can be applied to
 a
product independent of the pre-stretch level.  The pre-stretch level 
is
maintained even when film force levels are decreased.  Other older 
technology
systems suffer from inelastic strain recovery, which relaxes or gives 
back
30% to 70% of the pre-stretch of the film when light force is applied 
to the
product.  This problem of relaxing does not occur with the Highlight 
Dual
Power Hydro-Stretch.

Dancer Bar System:

The dancer bar system on the Dual Power Hydro-Stretch controls the 
force
to the product and applies it evenly around the product.  Other 
systems
increase and decrease the speed of the power feed downstream roller to
compensate for changes in film demand from the corners of the pallet.

The changing of the speed of the film feed to compensate for the 
corners
of the pallet increases and decreases the stretch level and is hard on
 the
film, possibly causing the film and applies it smoothly to the 
product.
This dancer bar system also provides a visual reference to monitor the
force applied to the product.

Turntable System:

-3 HP 3 Phase AC Motor
-AC Frequency Drive with Acceleration and Deceleration Control
-12 RPM Turntable Maximum Speed
-20,000 lb. Capacity Conveyor - 30 FPM

Film Carriage / Elevator System:

-1 HP AC Carriage Drive Motor
-Top and Bottom Wrap Counters
-Dual Belt Elevator Lift
-Adjustable Raise and Lower Speeds
-Automatic Height Detection Photoelectric Sensor
-Adjustable Height Over-rides

Film Delivery System:

-Dual Powered Hydro-Stretch
-.75 HP 3 Phase AC Motor
-AC Frequency Drive with Acceleration and Deceleration Control
-Adjustable Film Pre-Stretch
-Adjustable Film Force
-10" Diameter Roll Capacity
-20" Height Roll Capacity
-Roping capable

Electrical Specifications:

-Electrical Service: 480 VAC 3 Phase, 30 Amp, 60 Hz.
-Air:  80 PSI, 3SCFM
-Nema-12 rated, free standing control panel
-Flexible conduit wire-ways
-JIC wiring standard
-Programmable Logic Controller Allen Bradley Micrologix 1400
-Industrial Nema-12 Push Button Operator Controls
-Maple Systems HM1520T Touch Screen Operator Controls
-Quick connect electrical connection

Operators Manual/Electrical Drawings included.

Line is removed and in storage: Toledo, Ohio


We will sell this to you you can install & try the wrapping unit 
within 60 days.  If you like it install the conveyor & keep it.  If 
you don't like it send it back freight prepaid & we'll refund the 
purchase amount.







PRICE....................:  SEND A QUOTATION!!!