SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:



MATERIAL THICKNESS:              0.008" MIN. - 0.135" MAX.
COIL WIDTH::                     12" MIN. - 54" MAX.
COIL WEIGHT:                     40,000# ENTRY / 40,000# EXIT
ENTRY COIL ID RANGE:             19.5" - 28"
ENTRY COIL O.D.:                 72"
EXIT COIL I.D.:                  16" / 20"
EXIT COIL O.D.:                  72"
LINE SPEED MAX.:                 600 - 1200 FPM
PACKAGING LINE WEIGHT MAX.:      8,000 LBS.
LINE DIRECTION:                  LEFT TO RIGHT
OVERALL LINE LENGTH:             64'

CONSISTING OF THE FOLLOWING:

-3 ARM COIL STORAGE HORN
   POWERED ROTATION
   U SHAPE ARMS TO ACCEPT C HOOKS

-L TYPE COIL CAR
   SELF CONTAINED HYD.
   HYD. LIFT AND HYD. MOTOR TRAVEL

-MANDREL TYPE UNCOILER
   PUMPKIN TOOTH DESIGN LEAVES
   19.5" TO 24" EXPANSION RANGE
   10 HP DC MOTOR, 650-1950 RPM, FEED UP AND BRAKING
   SLIDING BASE
   POWERED OVERARM HOLD DOWN ROLL
   REBUILT WITH NEWER ROYALTON MANDREL AND WEDGES

-ENTRY UNIT
   PEELER TABLE, HYD. LIFT AND EXTEND
   3 ROLL COIL BREAKER, HYD. MOTOR DRIVEN
   GAMMA RAY GAGE UNIT, MOTORIZED FULL COIL SCAN
   HYDRAULIC ENTRY CROP SHEAR
   DC MOTOR DRIVEN PINCH ROLL UNIT

-ENTRY LOOP CASCADE TABLE
   HYDRAULIC LIFT
   ENTRY AND EXIT NON MARKING ROLLS

-SLITTER HEADS, (2) HEADS
   CRANE REMOVAL TYPE HEADS
   7" DIA. ARBORS
   DOUBLE ECCENTRIC ARBOR ADJUSTMENT
   100 HP DC MOTOR DRIVE
   APPROX. 210 KNIVES

-INSPECTION TABLE
   SCRAP GUIDES AND TROUGH TO THE BALLER

-COIL TECH SCRAP BALLER
   AC MOTOR DRIVEN
   HYDRAULIC MANDREL EXTRACTION
   HYDRAULIC OPERATED BALL MASHER
   SCRAP BALL REJECT ARMS

-PIT CROSS OVER TABLES
   MECHANICAL LIFT ON BOTH SIDES OF THE PIT

-COMBINATION DRAG AND ROLL TYPE TENSION UNIT
   ENTRY SEPARATOR TOOLING BAR
   DRAG BOARD TENSION UNIT WITH AIR BAG FOR TENSION
   URETHANE COVERED TENSION ROLLS
   19" DIA. WATER COOLED BRAKES
   AC GEAR MOTOR FOR FEED UP
   HYDRAULIC EXIT CROP SHEAR
   THREADING TABLE
   DEFLECTOR ROLL WITH TACH FOR FEEDBACK

-RECOILER
   16" AND 20" DIA. DRUMS, INTERCHANGEABLE
   HYDRAULIC GRIP AND EXPAND
   HYDRAULIC PUSH OFF
   OVERARM SEPARATOR
   125 HP DC MOTOR DRIVE,
   TOOLING BAR WITH 55" USEABLE TOOLING SPACE

-EXIT L TYPE COIL CAR
   SELF CONTAINED HYD.
   NARROW COIL SUPPORT ARMS
   HYDRAULIC LIFT AND HYD MOTOR POWERED TRAVEL

-2 ARM EXIT TURNSTILE
   HYDRAULIC PUSH OFF
   POWERED ROTATION

-DOWNLAYER
   IN LINE DESIGN
   HYDRAULIC TILT AND HORN EXTENSION
   GRAVITY FEED ROLL TOP

-ELECTRICAL HAS BEEN UPGRADED WITH NEW SIEMENS DRIVES

-DRAWINGS ARE COMPLETE AND MAINTENANCE RECORDS ARE INTACT

-LINE IS CURRENTLY CONFIGURED WITH BOTH AN ENTRY &
  EXIT LOOP FOR TENSION FREE SLITTING.

-LINE IS INSTALLED AND UNDER POWER

 BELOW LISTED PRICE IS ONLY VALID PRIOR TO REMOVAL






PRICE....................:  SEND A QUOTATION!!!