SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:

YEAR: 1970

MODEL 300 DOUBLE LOOP OR DRIVE TYPE SLITTING LINE

*NOTE:  SLITTING HEAD REBUILT IN 1987

SPECIFICATIONS:

-UNCOILER:  COOPER WEYMOUTH PETERSON MOTORIZED MODEL NUMBER 4.5 RM-24,
  MAXIMUM COIL WEIGHT:                10,000 LBS.
  MAXIMUM COIL WIDTH:                 24" (ACTUAL 38")
  MAXIMUM COIL O.D.:                  60"
  COIL I.D. RANGE:                    15.5" TO 20.5"
  LINE DIRECTION:                     RIGHT TO LEFT

 WITH:
  FULLY FORMED & MACHINED 3 LEAF DRUM
  MANUAL MANDREL EXPANSION
  MANUAL TRAVERSING BASE
  40 HP DC MOTOR 1750/2100 RPM 3/60/460 VOLT
  PEDESTAL CONTROL FOR RUN/STOP/FORWARD/REVERSE/JOG
  WICHITA HEAVY DUTY AIR BRAKE

COMBINATION FREE STANDING AUTOMATIC EDGE CONTROL SYSTEM WITH 
ADJUSTABLE LOOP
 CONTROL & TACH GENERATOR.

 WITH:
  2 ROLLER TYPE EDGE GUIDES WITH INDIVIDUAL MOTOR SCREW ADJUSTMENTS
   AND CYLINDER FOR VERTICAL LIFT.

-SLITTING HEAD:  RUESCH MODEL 300
  LENGTH OF ARBORS:                 27"
  DIAMETER OF KEYED ARBORS:         4"
  SPEED:
   DOUBLE LOOP MODE:                500 FPM
   PULL MODE:                       500 FPM ON BARE DRUM, BUILDING TO 
1500 FPM
                                     AT 60" COIL O.D.
  THICKNESS RANGE:
   DOUBLE LOOP MODE:                (STAINLESS) .002" TO .050"

  WITH:

   IN-FEED IDLER PASS LINE ROLL
   ADJUSTABLE MATERIAL EDGE GUIDES
   MANUAL PARALLEL JACK SCREW ADJUSTMENT TO BOTTOM ARBOR WITH DIAL 
INDICATORS.
   POWER OPENING TO OUTBOARD HOUSING
   EXIT DRIVEN PINCH ROLLS WITH TWIN HYDRAULIC CYLINDERS FOR TOP ROLL 
ADJUSTMENT.
   DRIVE MOTOR:  40 HP DC MOTOR 1750 RPM 500 VOLT WITH QUANTUM III 
DIGITAL DC
    DRIVE WITH INPUT FOR 3/50 OR 60/220-480 VOLT 130 AMPS.
   FREE STANDING OPERATORS CONTROL STATION

-TENSION STAND:  RUESCH
  PAD TYPE WITH AIR CYLINDERS
  IN-FEED PINCH ROLLS
  SEPARATOR BAR WITH TOOLING
  EXIT PASS LINE ROLL

-RECOILER:  RUESCH
  MAXIMUM COIL WEIGHT:  10,000 LBS.
  MAIN SHAFT THRU THE DRUM:  6 1/2"
  DRUM DIAMETER:  16" WITH MANUAL COLLAPSE & GRIPPER
  WITH:
   EXTRA 12" DIAMETER DRUM
   HYDRAULIC PUSHOFF PLATE
   MOTOR:  RELIANCE 25 HP DC 500-1800 RPM 230 VOLTS WITH QUANTUM III
    DIGITAL DC DRIVE WITH INPUT FOR 3/50 OR 60/220-460 VOLT 130 AMPS
   HYDRAULIC PUMPING UNIT

  OVERARM SEPARATOR UNIT:  RUESCH
   FREE STANDING
   AIR OPERATED

  WITH:
   TOOLING BAR & TOOLING

-SCRAP WINDER:  RUESCH
  WITH:
   VARI-SPEEDS & LEVEL WIND

-TOOLING:
  APPROX. 360" OF KNIVES
  ASSORTMENT OF STEEL STRIPPER RINGS AND STEEL SPACERS


PRICE....................: U.S. $ 119,500







PRICE....................:  SEND A QUOTATION!!!