SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:

Downlayer
3.5" dia. hydraulically driven rolls x 80" face on 7" center
1 1/8" hex shaft
36" pass height
aprox 58" form floor to top of horn
horn has 2" riser that can be installed for larger ID
horn to sprocket cover: 28.5"
2 hydraulic cylinders for tip
Right angle discharge

Downlayer
3.5" dia. hydraulically drivenr rolls x 61.5" face on 6.5" centers
58" length
1 1/8" hex shaft
36" pass height
40" from floor to top of horn
horn has a 2" riser plate that can be installed for larger ID
32" from centerline of horn to sprocket cover
2 hydraulic cylinders for tip
12' horn length

Downlayer
3.5" dia. hydraulically driven rolls x 82" face on 7.25" centers
81" long
36" pass height
18" horn
2 hydraulic cylinders for tip
52" form floor to top of horn
18" horn
right angle discharge



Conveyor- aprox 30 degree bend
3.5" dia. rolls x 64" face on 7.5" centers
36" pass height
AC gearmotor drive
107" length

Conveyor- straight

5" dia. driven rolls x 66" face on 7.75" centers
36" pass height
one- 6' length missing sprockets and chains
one- length w/230V./1650RPM/1HP gear motor
one- 12' length missing rolls, broken bearings, etc.
one- 17' length, missing drive and 5 rolls

Scale conveyor
Mastron model MT 4420
20,000# capacity
3.5" dia. driven roll x 63.5" face
1 1/8" hex shaft
7' length
Flexmount-National Scale cells 5,000# cap. each(missing one footpad 
and cell)
Digital readout

Platform scale
6' x 8' deck x 18" high

ID/OD Grab Table
3.5" dia. rolls on 7.25" centers
71" between sprockt guards on each side
36" pass height
66" length

Ranger Stacker Frame








PRICE....................:  SEND A QUOTATION!!!